|
|
Control the CS:S BOTS
Difficulty: Beginner |
| Category: CS:S > Server Administration | Author(s): BlkDrgn |
Counter Strike Source Bot commands
Part 1: Bot controls!
======================
bot_chatter: off / radio / minimal / normal
Controls how often the bots use their radios.
bot_defer_to_human: 0/1
Set to 0 to let bots complete map objectives.
bot_difficulty: 0/1/2/3
0 is Easy, 1 is Normal, 2 is Hard, & 3 is Expert. You must set this cvar before you add the bots.
bot_join_after_player: 0/1
Bots wait for a human to join before joining. Set to 0 to allow bots to play without humans.
bot_join_team: any / CT / T
Add bot(s) to a specific team.
bot_add
Adds a bot to whichever team has fewer players
bot_add_ct
Adds a Counter-Terrorist bot
bot_add_t
Adds a Terrorist bot
bot_kick
Kicks the specified bot, or all bots if no name is given
bot_kill
Kills the specified bot, or all bots if no name is given
bot_prefix: "string"
Defines a Prefix for all bot's names.
bot_quota
Set to # of bots allowed on server
bot_quota_mode normal / fill
Determines the type of quota. Allowed values: 'normal' and 'fill'. If 'fill', the server will adjust bots to keep N players in the game, where N is bot_quota.
bot_auto_vacate
If nonzero, bots will automatically leave to make room for human players.
bot_auto_follow
If nonzero, bots with high co-op may automatically follow a nearby human player.
bot_memory_usage
Reports on the bots' memory usage
bot_allow_rouges 0 / 1
If nonzero, bots may occasionally go 'rogue'. Rogue bots do not obey radio commands, nor pursue scenario goals.
bot_eco_limit
If nonzero, bots will not buy if their money falls below this amount.
Part 2: Weapon Restrictions
============================
bot_all_weapons
Allows the bots to use all weapons
bot_knives_only
Restricts the bots to only using knives
bot_pistols_only
Restricts the bots to only using pistols
bot_snipers_only
Restricts the bots to only using sniper rifles
bot_allow_grenades: 0/1
bot_allow_machine_guns: 0/1
bot_allow_pistols: 0/1
bot_allow_rifles: 0/1
bot_allow_shotguns: 0/1
bot_allow_snipers: 0/1
bot_allow_sub_machine_guns: 0/1
Part 3: Navigation Editing
==========================
sv_cheats 0 / 1
Must be set to 1 to enable navigation tuning.
nav_quicksave
Set to one to skip the time consuming phases of the analysis. Useful for data collection and testing.
nav_generate
Generate a Navigation Mesh for the current map and save it to disk.
nav_analyze
Re-analyze the current Navigation Mesh and save it to disk.
nav_edit
Set to one to interactively edit the Navigation Mesh. Set to zero to leave edit mode.
nav_mark_walkable
Mark the current location as a walkable position. These positions are used as seed locations when sampling the map to generate a Navigation Mesh.
nav_clear_walkable_marks
Erase any previously placed walkable positions.
nav_load
Loads the Navigation Mesh for the current map.
nav_save
Saves the current Navigation Mesh to disk.
nav_mark
Marks the Area under the cursor for manipulation by subsequent editing commands.
nav_corner_lower
Lower the selected corner of the currently marked Area.
nav_corner_raise
Raise the selected corner of the currently marked Area.
nav_corner_select
Select a corner of the currently marked Area. Use multiple times to access all four corners.
nav_begin_area
Defines a corner of a new Area. To complete the Area, drag the opposite corner to the desired location and issue a 'nav_end_area' command.
nav_end_area
Defines the second corner of a new Area and creates it.
nav_connect
To connect two Areas, mark the first Area, highlight the second Area, then invoke the connect command. Note that this creates a ONE-WAY connection from the first to the second Area. To make a two-way connection, also connect the second area to the first.
nav_disconnect
To disconnect two Areas, mark an Area, highlight a second Area, then invoke the disconnect command. This will remove all connections between the two Areas.
nav_crouch
Toggles the 'must crouch in this area' flag used by the AI system.
nav_delete
Deletes the currently highlighted Area.
nav_jump
Toggles the 'traverse this area by jumping' flag used by the AI system.
nav_merge
To merge two Areas into one, mark the first Area, highlight the second by pointing your cursor at it, and invoke the merge command.
nav_no_jump
Toggles the 'dont jump in this area' flag used by the AI system.
nav_precise
Toggles the 'dont avoid obstacles' flag used by the AI system.
nav_show_approach_points
Show Approach Points in the Navigation Mesh.
nav_show_danger
Show current 'danger' levels.
nav_splice
To splice, mark an area, highlight a second area, then invoke the splice command to create a new, connected area between them.
nav_split
To split an Area into two, align the split line using your cursor and invoke the split command.
nav_strip
Strips all Hiding Spots, Approach Points, and Encounter Spots from the current Area.
Part 4: Navigation Bot Controls
==============================
bot_crouch: 0/1
Label a marked nav area as a forced crouching point.
bot_debug: 0/1
Used for debugging info of bot behavior.
bot_freeze: 0/1
Used to freeze all bots; 1 is on, 0 is off.
bot_goto_mark
Sends a bot to the selected nav area (for editing nav meshes)
bot_show_nav: 0/1
Shows the bot's nav mesh.
bot_stop: 0/1
Same as bot_freeze?
bot_traceview: 0/1
See the bot's field of view while navigating a map.
bot_traceview_extended: 0/1
New command...
bot_walk: 0/1
Force the bots to walk.
bot_zombie: 0/1
Used for playtesting navmeshes.
Part 5: Place Painting
=======================
nav_toggle_place_mode
Toggle the editor into and out of Place mode. Place mode allows labelling of Area with Place names.
nav_toggle_place_painting
Toggles Place Painting mode. When Place Painting, pointing at an Area will 'paint' it with the current Place.
nav_place_floodfill
Sets the Place of the Area under the cursor to the curent Place, and 'flood-fills' the Place to all adjacent Areas. Flood-filling stops when it hits an Area with the same Place, or a different Place than that of the initial Area.
nav_place_pick
Sets the current Place to the Place of the Area under the cursor.
nav_use_place
If used without arguments, all available Places will be listed. If a Place argument is given, the current Place is set.
nav_mark_unnamed
Mark an Area with no Place name. Useful for finding stray areas missed when Place Painting.
|
| Added: 3 years ago | Tags: control, bots |
|
 Add Feedback Provide constructive feedback. What is "constructive"?You cannot post yet!Get involved on FPSB by posting your thoughts. Give authors your feedback to help them develop. To post in this submission register or login. |
 You cannot assess yet!Moderating FPSB is in your hands - when you assess a submission your vote determines its success or failure. To vote on this submission register or login. This Tutorial in a nutshell...  No stamps recordedYou cannot stamp yet!Stamps let you apply characteristics to submissions to help others understand them. To stamp this submission register or login. Want more? Find related tuts. |
Subscribe
